ProControl 2

ProControl2 radio remote controls boast up to 9 channels of customizable controls, remote meter display and  RFID reader capability. Used primarily in the petrochemical industry for fleet refueling and home delivery trucks where pump and volume control is critical. Up to 1000 feet range, increases safety and reduces spill risk.

GetAQuoteButton

Industries

Oil & Gas
radio remote controls

Features

  • Designed to allow complete control over LNG transfer operations
  • Handheld LCD display shows the exact meter reading to 1/10th of a unit in real time
  • Direct serial interface with meter register shows a mirror image volume identical to the tank register
  • Handheld remote control unit with backlit LCD display will operate up to 500ft from truck
  • Kits available for all types of electronic and mechanical registers – reads in gallons or liters. Includes handheld remote display unit and truck mounted receiver/controller
  • Ideal for monitoring delivery volume while pumping
  • Operator has simultaneous control of up to eight custom truck operations in addition to remote meter display described above
  • Emergency Stop feature closes all tank valves and stops truck engine (if equipped)

Overview

Basic system includes Remote Meter Readout with Truck Controls as requested by Customer. Modular components allow for easy installation and field replacement.

Available with 5-minute ‘Query’ automatic emergency shut-down feature

Complies with all US, Canadian, and International DOT standards for tank truck remote emergency shut-down.

Specifications

HANDHELD TRANSMITTER SPECIFICATIONS

Handheld controller uses direct sequence, spread-spectrum radio technology to ensure interference-free communication.  Rechargeable transmitter delivers 30hrs of continuous use between charges (charger supplied). ‘Enable’ option requires two deliberate steps before signal is sent (Enable button plus command signal). 

  • FREQUENCY OF OPERATION  2.4GHz DSS (869.7 and 902-928MHz available)
  • TRANSMITTER POWER  Up to 60mW
  • METHOD OF TRANSMISSION  56 bit DES encryption key
  • ANTENNA  Internal (no visible antenna to damage)
  • NORMAL RANGE 1000ft (300m)
  • FCC APPROVAL #  OUR-XBEEPRO (2.4 Ghz) KQLAC4490-100 (902-924 Mhz)
  • CONSTRUCTION  Rugged weatherproof polymer enclosure
  • TEMPERATURE SPECIFICATION  Minus 20°F to 185°F
  • BATTERY LIFE  30 hours of continuous transmission with low battery indicator
  • BATTERY TYPE  Rechargeable Lithium Ion included with 12/24VDC charger
  • ROHS LEAD-FREE COMPLIANT

RECEIVER/CONTROLLER SPECIFICATIONS  

 Interface to electronic meter and chassis controls is simplified with factory installed, direct-plug connections to register pulse output or through J1939 serial communication (other protocols available). Optional pre-wired solenoids are available for pneumatic or electric accessory control.  

  • FREQUENCY OF OPERATION  2.4GHz DSS (869.7 and 902-928MHz available)
  • POWER SUPPLY 12/24VDC (Optional 120VAC systems available)
  • CURRENT LOAD  Up to 4Amps @ 12VDC per channel or  10Amps DC per system total
  • CONSTRUCTION  Rugged weatherproof polymer enclosure
  • ANTENNA  External antenna/coax included
  • WIRING CONNECTIONS  Pre-wired to meet customer requirements, quick connect fittings supplied
  • PROGRAMMING MODES  Up to 8 programmable channels Including Latched, Momentary, Safety Latched,
  • Query, Enable, and Interlock modes (custom OEM programming available)
  • SERIAL COMMUNICATION  Optional J1939 CAN bus/RS232 interface to OEM serial networks
  • TOTAL SYSTEM WEIGHT  2lb
  • FCC approved system meets US and Canadian DOT requirements for “Off Truck” remote controls.
  • ROHS LEAD-FREE and EUROPEAN CE COMPLIANT