Crane Service Truck | Electric And Hydraulic Radio Remote Controls

Up to 12 channels of On / Off control. Used on electric or hydraulic service trucks, cranes and other applications requiring interference-free control. Features rechargeable batteries, serial communication and up to 2000 feet range.

Petroleum Products

non - Petroleum Products

OVERVIEW
MODELS
TRANSMITTER SPECIFICATION
RECEIVER SPECIFICATION

CRANE SERVICE TRUCK NON-PROPORTIONAL HYDRAULIC RADIO REMOTE CONTROLS

Radio remote controlled Service Cranes greatly increase jobsite safety by providing the operator the safest vantage point for tank delivery. One-man control eliminates a second person instructing the operator where to position the tank. Operator has freedom of movement around entire worksite while setting tank precisely into position.

Handheld Transmitter

Handheld transmitters are available with up to twelve crane control buttons as specified by customer
Rechargeable transmitter delivers 30 hrs of continuous use between charges (charger supplied)
Optional 'Enable' button requires two deliberate steps before signal is sent (Enable plus command signal)

Equipment Mounted Receiver/Controller

Up to twelve pre-programmed high-side outputs available
Outputs can be selectively interlocked to other operations for safety reasons
Optional external antenna extends range from 100ft up to 2000ft
Interface to OEM crane controls can be simplified with factory installed, direct-plug connectors or through J1939 serial communication (other protocols available)
Modular components and external set-up button allow for easy installation and field replacement

Model # DSST

Developed for proportional and non-proportional hydraulic crane applications requiring up to twelve radio remote control functions.
Toggle switch controls with trigger provides variable speed control of hydraulic pump solenoids.
Split signal capability allows combined boom movements including 'up and sideways' and 'extend and winch down'.
Toggle switch controls must be activated first before trigger switch and speed control will work.
Weatherproof receiver can be crane mounted and interfaces easily to crane electrical system with OEM style plug-in connector.

TRANSMITTER SPECIFICATIONS

FREQUENCY OF OPERATION . . 902-928mHz FHSS (869.7 and 2.4GHz available)
TRANSMITTER POWER . . . . . . 100mW
METHOD OF TRANSMISSION . . 56 bit DES encryption key
ANTENNA . . . . . . . . . . . . . Internal 'on card' PCB mount (no visible antennas to damage)
NORMAL RANGE . . . . . . . . . 500 feet (up to 2000ft available with external antenna)
FCC APPROVAL # . . . . . . . . . KQLAC4490-100 (non-licensed)
CONSTRUCTION . . . . . . . . . Rugged weatherproof polymer enclosure
TEMPERATURE SPECIFICATIONS minus 20 F to 185 F
BATTERY LIFE . . . . . . . . . . . 30 hours continuous / audible low battery warning / flashing low battery indicator
BATTERY TYPE . . . . . . . . . . . Rechargeable Lithium Ion included with 12/24VDC charger

INTRINSICALLY SAFE FOR USE IN HAZARDOUS ENVIRONMENTS ROHS LEAD-FREE COMPLIANT

RECEIVER SPECIFICATIONS

FREQUENCY OF OPERATION . . 902-928mHz FHSS (433.92, 869.7 and 2.4GHz available)
POWER SUPPLY . . . . . . . . . . 12/24VDC (Optional 120VAC systems available)
CURRENT LOAD . . . . . . . . . Up to 4Amps @ 12VDC per channel or 10Amps DC per system total(High Current 30Amp "H" series receiver available)
CONSTRUCTION . . . . . . . . . IP67 rated, impact resistant polycarbonate (external mount if required)
ANTENNA . . . . . . . . . . . . . Internally protected and encased (optional external antenna/coax available)
WIRING CONNECTIONS . . . . Pre-wired to meet OEM requirements, quick connect fittings supplied
PROGRAMMING MODES . . . . . Up to 12 programmable channels including: Latched, momentary, Enable and INTERLOCK modes (custom OEM programming available)
SERIAL COMMUNICATION . . . Optional J1939 digital interface to OEM multiplex machine network
TOTAL SYSTEM WEIGHT . . . . . 2lbs

ROHS LEAD-FREE COMPLIANT