REMOTE METER DISPLAY

RADIO REMOTE CONTROLS

Model # FHSD

Designed to allow complete control over fuel delivery operations. A handheld LCD displays the exact meter reading to 1/10th of a unit in real time. Operator has simultaneous remote control of up to eight additional truck operations that can include cargo pump(s), tank valves, hose reel(s), engine RPM, and emergency stop systems. Allows operator to deliver an exact volume of product and extends cargo pump life by eliminating need to operate in ‘bypass’ when nozzle is closed. Kits available to connect with all types of electronic and mechanical registers that read in gallons or liters. Complete installation guide and drawings included.

Handheld controller uses frequency-hopping, spread-spectrum radio technology to ensure interference free, continuous communication. BASE Engineering’s proprietary ‘SafeLink’ option causes truck pumping operations to stop automatically if the signal between operator and truck is lost for any reason. Rechargeable transmitter delivers 30hrs of continuous use between charges (charger supplied). ‘Enable’ option requires two deliberate steps before signal is sent (Enable button plus command signal). All BASE Engineering products are backed by a 4-year warranty and 24/7 lifetime product technical support.

TRANSMITTER SPECIFICATIONS

FREQUENCY OF OPERATION	902-928MHz FHSS (869.7 and 2.4GHz available)
TRANSMITTER POWER	100mW
METHOD OF TRANSMISSION	56 bit DES encryption key
ANTENNA	Internal (no visible antenna to damage)
NORMAL RANGE	1000ft (300m)
FCC APPROVAL #	KQLAC4490-100 (non-licensed)
CONSTRUCTION	Rugged weatherproof polymer enclosure
TEMPERATURE SPECIFICATION	Minus 20 F to 185 F
BATTERY LIFE	30 hours of continuous transmission w/audible low battery warning and flashing low battery indicator
BATTERY TYPE	Rechargeable Lithium Ion included with 12/24VDC charger

INTRINSICALLY SAFE FOR USE IN HAZARDOUS ENVIRONMENTS • ROHS LEAD-FREE COMPLIANT
Interface to electronic meter and chassis controls is simplified with factory installed, direct-plug connectors or through J1939 serial communication (other protocols available). Optional pre-wired solenoids are available for pneumatic or electric accessory control. Modular components allow for easy installation and field replacement.

TRANSCEIVER SPECIFICATIONS

Combined meter readout transmitter and chassis/tank mounted controller

FREQUENCY OF OPERATION	902-928MHz FHSS (869.7 and 2.4GHz available)
POWER SUPPLY	12/24VDC (Optional 120VAC systems available)
CURRENT LOAD	Up to 4Amps @ 12VDC per channel or 10Amps DC per system total
CONSTRUCTION	IP67 rated, impact resistant polycarbonate (external mount if required)
ANTENNA	external antenna/coax included
WIRING CONNECTIONS	pre-wired to meet customer requirements, quick connect fittings supplied
PROGRAMMING MODES	Up to 8 programmable channels Including LATCHED, MOMENTARY, SAFETY LATCHED, QUERY, ENABLE, and INTERLOCK modes (custom OEM programming available)
SERIAL COMMUNICATION	Optional J1939 CAN bus interface to OEM serial networks
TOTAL SYSTEM WEIGHT	2lb ROHS LEAD-FREE and EUROPEAN CE COMPLIANT