overview

Pressing the Emergency Stop button causes the receiver/controller unit to trigger a shut down. The system cannot be rebooted until the E-Stop button is pulled out and a manual receiver/controller reset is performed. E-Stop buttons are dual contact - dual channel, and comply with global E-Stop switch requirements. Systems will fail safe, triggering an automatic E-Stop with any loss of main line electrical power supply to the main receiver/controller unit.

Fixed frequency remote E-Stop switch operates at 433 MHz using two double “A” batteries. The transmitter is energized only when E-Stop switch is activated. Battery Test button shows a '“low battery” flashing LED on the E-Stop switch as well as on the receiver/controller unit. A “low battery” alarm or indicator lamp output is supplied for auxiliary low battery warning. Typical battery life is one to two years, but routine battery testing and replacement is recommended. Typical operating range up to 1000ft.

Features

• Designed specifically for bulk storage and off-loading facilities by the world leading experts in Hazardous Location Wireless Emergency Stop Systems

• Eliminated expensive explosion-proof hard wiring and conduit

• ATEX and IECEx approved for use in Hazardous Environments

• Combination of fixed mounted wireless E-Stop switches and portable handheld switches

• Emergency Stop transmitter units can be strategically located on or

  near fuel transfer equipment within a 1000ft radius

• 300 hour battery life

• Intrinsically Safe Zone 0 Rated

• Global Equivalent to C1 I, Div 1